Send Message

Low Noise Ultrasonic Cleaning Device , Industrial Ultrasonic Washing Machine

Basic Information
Place of Origin: CHINA
Brand Name: GT SONIC
Certification: CE/FCC/ROHS
Model Number: VGT-1018S
Minimum Order Quantity: 1
Price: Negotiable
Packaging Details: wooden box
Delivery Time: 3-25 days
Payment Terms: L/C, T/T
Supply Ability: 100pcs/day
Certification: CE,RoHS,FCC Material: Stainless Steel
Machine Type: Industrial Ultrasonic Cleaner After-sales Service Provided: Online Support
Heating Power: 3000w Ultrasonic Power (w): 1080w
High Light:

industrial ultrasonic washing machine

,

ultrasonic vibration cleaner

Car Parts Ultrasonic Cleaning Machine Industrial Ultrasonic Cleaner Low Noise 65L

FEATURES of VGT Industrial cleaner

2.0 thickness stainless steel tank for acid-proof, anti-corrosive

Ultrasonic power can be adjusted from 0-100%

Temperature control: 30℃-110℃

Sweep and memory function

Stainless steel SUS304 basket and Lid

Industrial grade for 24 hours continuous working

ABOUT Ultrasonic CLEANING

Ultrasonic cleaning is based on the cavitation effect caused by high frequency Ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and they implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. The bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently. Ultrasonic cleaning is extremely effective at removing dirt and grime which would normally require tedious manual cleaning by hand. It has been used to clean a wide variety of instruments and mechanical parts such as carburetors, returning them to almost “like new” condition without damage to delicate parts

APPLICATIONS

This list is almost endless, provided the product is non porous and can normally be

immersed in water anything can be thoroughly cleaned. Here are some examples:

● Engine/model parts

● Electrical components

● Diesel injection pumps

● Motorcycle radiators

● Vehicle differentials

● Golf club&grips&golf balls

● Horse bits&stirrups&horse brasses

● Motorcycle engine crank cases

● Engine cylinder heads

● Bicycle derailleurs

● Gun and gun components

SPECIFICATION

 

 

Model

 

Tank size

Unit size

 

Volume

Ultrasonic

Power

Ultrasonic

Frequency

 

Heating power

Heating

temperature

(L×W×H)mm (L×W×H)mm (L) (W) (kHz) (W) (℃)
VGT-1012S 400×300×330 530×430×600 40 720 28/40 2000 30-110
VGT-1018S 500×350×360 630×480×650 65 1080 28/40 3000 30-110
VGT-1024S 600×400×400 730×530×700 96 1440 28/40 4000 30-110
VGT-1030S 650×450×400 790×590×700 117 1800 28/40 4000 30-110
VGT-1036S 700×500×450 840×640×750 157 2160 28/40 5000 30-110
VGT-1042S 750×550×500 890×690×800 206 2520 28/40 6000 30-110

FAQ

1. What are the advantages of Ultrasonic cleaning?

Easy handling

Efficient

Eco-Friendly

Versatile Contaminant Removal

Cost-effective

2. Do I have to fill my tank to the "MAX" line?

YES! Your Ultrasonic cleaner's manufacturer designed the unit to work best when filled to that “ MAX” line. If under filled, the characteristics of the environment change, which could result in improper Ultrasonic transmission, which in turn could result in poor cleaning performance or damage to the unit. Units with a heater are especially at risk of damage due to underfilling.Drying running will damage heating elements and tank.

3. How Long Should an Ultrasonic Cleaning Cycle Be?

There is no set amount of time or “typical” cleaning cycle. How dirt the part is, the temperature of the tank, how clean the part is to be, and the condition of the Ultrasonic cleaning solution all contribute to the length of the cleaning cycle.

Generally, for 2-27L machine suggest the machine not continuously running for 30 minutes, please stop at least 20 minutes before a new running cycle.If you need long time continuously running, industrial series Ultrasonic cleaner can be approved.

4. How to test your Ultrasonic cleaners with best cleaning effect?

Foil test:Take three tiny pieces of 4” x 8” of an aluminum foil. Fold each of the foils over a rod then suspend the foil pieces into the tank, with one piece in the center of the tank, and each of the other two at opposite ends of the tank. Be sure the tank is filled to the max line. Turn on the Ultrasonic cleaning system for 10 minutes.Inspect after removing the foil,all three pieces should be perforated and furrowed.

Glass slide test: Wet a frosted piece of glass with tap water, and draw an “X” on the frosted side of the glass, corner to corner with a number two pencil. Make sure the tank is filled to the correct level with fresh Ultrasonic cleaning solution. Immerse the glass into the tank and activate the system. The “X” should begin to be removed immediately, and should be gone completely from the glass within 10 seconds.

5. Which cleaning solution should I use?

A number of detergents, wetting agents and other such components are used in the making of a modern Ultrasonic cleaning solution. And there is a variety of formulations available from which you can take your pick depending on the application. Selecting a proper solution is very important for a satisfactory cleaning job and to stop unwanted reactivity with the part being cleaned.

6. When should the Ultrasonic solutions be changed?

Solution should be changed when the solution is very dirty or depleted or when you notice a decrease in cleaning action.However, you must remember that every cleaning session does not require a new batch of solution.

Product details:

Low Noise Ultrasonic Cleaning Device , Industrial Ultrasonic Washing Machine 0

Low Noise Ultrasonic Cleaning Device , Industrial Ultrasonic Washing Machine 1

 

Contact Details
GT SONIC

Phone Number : +8613713927837

WhatsApp : +8613713927837