96L 1440W Multi-frequency Industrial Ultrasonic Tank, Mental Parts Cleaner with Filtration
GTS Series Multi-function Industrial Ultrasonic Cleaners have the following advantages: original BLT type transducer, overload protection generator, overheating protection components, SUS 304 stainless steel tank, adaptable for continuous operation, with separate control ultrasonic electronic generator, digital timer & heating control, pressure pump and filter system are available, boost mode& oil skimmer upon clients requirement,customized size is available.
Feature
Original BLT type transducer
Overload protection generator
overheating protection components
SUS 304 stainless steel tank
Adaptable for continuous operation
With separate control ultrasonic electronic generator
digital timer & heating control
pressure pump and filter system are available
boost mode& oil skimmer upon clients requirement
Customized size is available
Function
1. Ultrasonic cleaning
2. Filtration recycle system
3. Bubbling system
4. Oil filtration system
5. Sweep function
6. Timer (0-99min or 24 hours continuous working) and heater (0-110℃) adjustable
7. Ultrasonic power adjustable
Specifications
|
Model
|
Tank Size
LxWxH(mm)
|
Volume
(L)
|
Ultrasonic Power
(W)
|
Ultrasonic Frequency
(KHz)
|
Heating Power
(W)
|
Timer
|
|
GTS-1012S
|
400*300*330
|
40
|
720
|
28/40
|
2000
|
30-110(℃)/86-230℉
|
|
GTS-1018S
|
500*350*360
|
65
|
1080
|
3000
|
|
GTS-1024S
|
600*400*400
|
96
|
1440
|
4000
|
|
GTS-1030S
|
650*450*400
|
117
|
1800
|
4000
|
|
GTS-1036S
|
700*500*450
|
157
|
2160
|
5000
|
|
GTS-1042S
|
750*550*500
|
206
|
2520
|
6000
|
Applications
Electronics and electrical industry machinery, automotive, motorcycle industry, chemical fiber industry, brewing industry, aircraft industry, machinery industry, broadcasting, power, communications industry, hospitals, medical research industry, financial institutions, metal products industry and other applications.
FAQ:
1. How Long Should an Ultrasonic Cleaning Cycle Be?
There is no set amount of time or “typical” cleaning cycle. How dirt the part is, the temperature of the tank, how clean the part is to be, and the condition of the ultrasonic cleaning solution all contribute to the length of the cleaning cycle.
Generally, for 2-27L machine suggest the machine not continuously running for 30 minutes, please stop at least 20 minutes before a new running cycle.If you need long time continuously running, industrial series ultrasonic cleaner can be approved.
2. How to test your ultrasonic cleaners with best cleaning effect?
Foil test:Take three tiny pieces of 4” x 8” of an aluminum foil. Fold each of the foils over a rod then suspend the foil pieces into the tank, with one piece in the center of the tank, and each of the other two at opposite ends of the tank. Be sure the tank is filled to the max line. Turn on the ultrasonic cleaning system for 10 minutes.Inspect after removing the foil,all three pieces should be perforated and furrowed.
Glass slide test: Wet a frosted piece of glass with tap water, and draw an “X” on the frosted side of the glass, corner to corner with a number two pencil. Make sure the tank is filled to the correct level with fresh ultrasonic cleaning solution. Immerse the glass into the tank and activate the system. The “X” should begin to be removed immediately, and should be gone completely from the glass within 10 seconds.
Product Details:
